if door(s) is slightly ajar and does not
meet opposing door or jamb: Loosen set screw on cam follower,
rotate the door to desired position and retighten screw
To Raise or Lower Doors
3.2
Raise door until cam follower clears the
lower V-cam
3.3
Loosen set screw and rotate the cam
follower 360 degrees as follows:
1 full rotation clockwise to raise the
door 1/4"
1 full rotation counterclockwise to lower
the door 1/4"
3.4
Repeat step 3.3 as needed. When finished
lower the door until the cams are seated together and retighten
the set screws.
Home
