Installation Instructions V-Cam

with 3/4", 1 1/2" and Deep Seat V-Cam Hardware

Center Punch
Drill (1/4" or 3/8" electric)
Drill Bits : 5/16", 9/64"
Extension Cord
Hammer
Level (3' minimum)
Level Bar
Needle Nose Pliers
Pen Pencil
Plumb Bob
Ratchet Wrench with 3" or 5" extension
Ratchet Socket 9/19", 1/4"
Screw Driver, Slotted
Security Driver
(for Steel-Lite only - bit supplied by RubbAir)
Tape Measure
Tap 3/8" - 16 NC
Wood Spacer Block (scrap 2"x4")