 |
 |
Not since the
introduction of Rubbair's original flexible door has the industry seen a
product that offers such a quantum leap ahead of existing door designs.
Quantum doors provide a one-two punch of advanced hardware and molding
technology that delivers more resistance to impact, superior long
lasting hinges, corrosion resistant hardware, wider two-way swing,
excellent sound and thermal insulation, plus easy installation and
minimum upkeep.
|
|
 Smooth,
Low-Wearing Helix Cam Hinge - Simply Better
The unique geometry
of the helix gives Quantum a huge advantage over more complicated
designs and requires no oil, grease, bearings or bushings.
An upper hinge section of precision machined aluminum travels upon a
lower cam section milled from wear resistant high-strength polymer. Both
sections share a common helical wear surface. As the door opens, load
and friction are spread evenly across the entire helix surface... there
are no points or edges to concentrate wear
|
|
 Easy To Install - Easy
to Maintain
Quantum doors are
shipped with a mounting template to assure precision positioning of the
hinge bracket and lower bearing. The door simply drops into the bearing
and slides into a slot on the mounting bracket. Three screws secure the
helix hinge to the bracket. Tapped holes assure correct alignment.
Height adjustment can be easily made by rotating the upper helix section
in 360° stops.
Easy, Reliable Installation Procedures.
|
|
 Advanced Panel Design
and Construction
Rubbair employs
proprietary techniques to form a tougher monolithic polyethylene door
"shell" that resists penetration by moisture, dirt and cleaning agents.
The fibers in this material cling together to resist impact, bending and
torque like no other.
Glazed Windows
Windows are constructed of two clear polycarbonate panes recessed with
frames into the door panel to eliminate abrasions or catch points.
Durable, good looking ABS frames can be removed easily for window
replacement if needed. Like other parts of the Quantum door, the window
and frames are USDA/FDA approved and easily wash down. |
Quantum Features
 | One piece molded body resist
penetration by moister, dust and chemicals |
| 50% more shell thickness at
impact areas than comparable doors |
| Helix hinge allows for 125° swing in both directions |
| Industrial
grade steel bracing the length of the door's spine |
| Rugged
polyethylene shell resist impact and bending |
| Factory aligned
hinge |
| 1-3/4" door
thickness with foam fill for sound and thermal insulation |
|
Stainless hinge post is securely
bolted to the door's spine |
 |
|
Reinforced nylon gaskets
slide easlily into molded chanel to form a seal against air flow and
dust. |
 |
| 125° swing geometry permits greater
clearance in both directioins |
 |
|
|
Home
